The machine can now be laid down, so it rests on the chute. If possible, place a piece of cardboard under
the chute to avoid scratching the paint.
P. Lindberg A/S
Tlf: 70212626
Guide the wheel axle through the bracket and
remount the wheel.
Secure the wheel using a spacer and the wheel
pin.
And secure the axle with two bolts.
Feed chute:
Position the chute on the blade box so that the
assembly holes align with the holes in the chute.
Fit the bolts, washers, and nuts.
Caution: Risk of cutting injuries!
Slightly tip the blade box back and fit the support
foot using M10 x 35 bolts, washers and M10 nuts.
Ensure that it is correctly positioned.
Attach the rubber support.
Attach the drawbar.
17
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9068995 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk