Ipv4&Ipv6 - Htek UC9 Series User Manual

IPv4&IPv6
If you set IP Mode to IPv4&IPv6, IP phone will support both IPv4 and IPv6 address. The settings of
DHCP and Static IP Address are same as above.
To configure IPv4&IPv6 via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port→ IP Port
Mode.
2. Press or to change the IP Port Mode.
3. Press or Save soft key to save the configuration.
To configure IPv4&IPv6 via Web interface:
1. Click Network→ Basic→ Internet Port
2. Select IPv4&IPv6 for Internet Port.
3. Click for the setting.
160