Call Waiting; Executive Override - NEC UNIVERGE SV9300 User Manual

It is possible to select the last digit of
the extension number from 0-9
arbitrarily.

CALL WAITING

This feature allows a terminal to camp itself on to
a busy terminal.
This feature is available only for the
terminal that is set by system data
setting at initial installation. For details,
please contact the system
administrator.
TO ACTIVATE CALL
WAITING
1.
Receive a busy tone.
BUSY
11:00 AM SUN 1 JUN 2014
CB CW
2.
Press Transfer key.
3.
Press Soft key (CW).
You will receive a special ringback tone.
CW SET
11:00 AM SUN 1 JUN 2014
Recall VOICE
TO ANSWER CALL WAITING
1.
Call in progress.
11:00 AM SUN 1 JUN 2014
MIC Mute
2.
Call Waiting feature is set.
201
>>>>
201
CB >>>>
210
79
FEATURE OPERATION
Answer key lamp flashes red. →
You will receive a Call Waiting tone (three
tone bursts).
CALL WAITING
11:00 AM SUN 1 JUN 2014
MIC Mute
3.
Press Answer key.
The original party is placed on hold and
connected to another party who initiates
Call Waiting feature.
4.
Press Answer key again.
Return to the original party and another
party is placed on hold. (It is possible to
change the connection as many times.)

EXECUTIVE OVERRIDE

This feature allows selected users to override a
busy condition on a called terminal.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
The terminal "b" is talking with the
terminal "c", and the terminal "a" is going
to override the connection.
(1) Call in progress.
(2) Override.
201