Call Pickup - Group - NEC UNIVERGE SV9300 User Manual

3.
Dial desired number.
11:00 AM SUN 1 JUN 2014
Recall VOICE
4.
The called party answers.
 Press Mic key or Soft key (MIC).
Mic key lamp lights red. →
 Talk toward the mic.
11:00 AM SUN 1 JUN 2014
MIC Mute
TO ANSWER A CALL WITH
HANDSFREE
1.
The Call Indicator Lamp flashing.
Line key lamp flashes red. →
2.
Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
3.
Talk toward the mic.
11:00 AM SUN 1 JUN 2014
MIC Mute
201
CB >>>>
201
201
71
FEATURE OPERATION
When you make a call handsfree,
please note the following items.
Avoid using in a place where there

is a lot of echo or noise.
The Microphone is located at the

front of the terminal. It should be
no further away than 50 cm.
When talking handsfree, be aware

of the volume level as to not
disturb people close to you.
Talk alternately with the other

party. The voice may be
interrupted if both party talk at the
same time.

CALL PICKUP - GROUP

This feature permits a terminal user to answer
any calls directed to other extensions in their
preset pickup group.
This feature is set by system data
setting at initial installation. For details,
please contact the system
administrator.
This feature is set by Soft key or feature
key. The feature key is set by system
data setting at initial installation. For
details, please contact the system
administrator.
1.
Ringing terminal in your Call Pickup
- Group.
2.
Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
11:00 AM SUN 1 JUN 2014
Recall PICK
200
>>>>