NEC UNIVERGE SV9300 User Manual page 15

NO. NAME
(8)
Cursor key
(9)
Menu key
(10)
Mic key (with
light)
(11)
Feature key (with
light)
(12)
Answer key (with
light)
(13)
Recall key
(14) Programmable keys
(with light)
(15)
Soft keys
(16)
Help key
(17) USB Port (Back)
(18) LCD
(19) Call Indicator Lamp
Enter key
This terminal has Shortcut Menu for frequently-used features.
Use this key to display the Shortcut Menu and determine the
selected item in the menu. Also, this key is used as
cursor-movement key on the local menu of the terminal.
Volume (UP/DOWN) key
Used to adjust speaker/receiver volume, and ringer volume.
Right key (Directory)
Press this key to open the Directory menu.
Left key (Redial)
Press this key to activate Redial feature. Press Redial and scroll
back through numbers that have been dialed. When the desired
number is displayed, press
To access the menu of terminal.
To respond handsfree. LED lights during speakerphone operation.
To activate features such as terminal setup and to program
One-Touch Speed Calling keys.
When LED on this key is lit, press this key to answer the incoming
call.
To finish a call and hear the dial tone to make an another call.
These keys can be programmed as Flexible line key/Programmable
feature key by system administrator.
The feature name is shown at the bottom of the LCD. The
appropriate feature key is displayed on the screen according to the
call handling process.
To call up explanations of the Soft keys on the LCD.
To connect USB Device for charging etc.
To display date or dialed number etc.
The lamp at the top corner of display flashes when a call terminates
to the terminal. Also, when you use
when a message has been left.
7
INTRODUCTION
FUNCTION
or to activate dialing.
VOICE MAIL, the lamp lights