Call Pickup - Direct; Multiline Appearance - NEC UNIVERGE SV9300 User Manual

3.
Press Soft key (PICK) or Call Pickup
- Group feature key.
PICK UP
11:00 AM SUN 1 JUN 2014
MIC Mute
4.
Start conversation with calling
party.

CALL PICKUP - DIRECT

This feature permits a terminal user to pickup a
call to any other terminal in the system.
This feature is set by system data
setting at initial installation. For details,
please contact the system
administrator.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
1.
Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
11:00 AM SUN 1 JUN 2014
Recall PICK
2.
Press Call Pickup - Direct feature
key.
11:00 AM SUN 1 JUN 2014
Recall PICK
3.
Dial the extension number of ringing
terminal.
201 210
200
>>>>
>>>>
PICK UP
11:00 AM SUN 1 JUN 2014
MIC
4.
Start conversation with calling
party.

MULTILINE APPEARANCE

This feature allows you to accommodate the
lines (another terminal number) other than My
Line on the Programmable line/feature keys.
When accommodating another terminal number
on the Programmable line/feature key, the user
can answer the call routed to another by
pressing the key that is assigned.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
TO ANSWER A CALL
1.
A call is terminated to the terminal
whose terminal number is
accommodated to the Multiline
Appearance feature key.
Call Indicator Lamp flashes.
Multiline key lamp flashes red. →
2.
Press Multiline Appearance feature
key.
Call Indicator Lamp goes off.
Speaker key lamp lights red. →
Multiline key lamp lights green. →
3.
Lift the handset to start a
conversation.
Speaker key lamp goes off. →
11:00 AM SUN 1 JUN 2014
MIC
72
FEATURE OPERATION
210 201
Mute
201
Mute