To Enable/Disable Lcd Back Light; To Enable/Disable Lcd Backlight Fade Control - NEC UNIVERGE SV9300 User Manual

9.
Enter the Wait Time.
After entering the Wait Time by digit key,
press or Soft key (OK).
The display goes back to the [Screen
Saver] screen.
TO ENABLE/DISABLE
LCD BACK LIGHT
Following explains how to turn On/Off of the LCD
Back light.
1.
Press key to display the Menu
Screen.
2.
Select "Setting".
Highlight an item by using
.
3.
Select " User Setting".
Select one of the following operations.
 Highlight an item by using
press ,
 Press
.
4.
Select " Display".
Select one of the following operations.
 Highlight an item by using
press ,
, and press
, and
or Soft key (OK).
, and
or Soft key (OK).
 Press
5.
Select "
Select one of the following operations.
 Highlight an item by using
press
 Press
6.
Select whether to turn On/Off of the
LCD Back light.
Select one of the following operations.
 Highlight an item by using
press
 Press
Soft key (OK).
The lighting time of back light is set by
system data setting at initial installation.
(The initial setting is 10 seconds.) For
details, please contact the system
administrator.
TO ENABLE/DISABLE
LCD BACKLIGHT FADE
CONTROL
Following explains how to set Backlight Fade
40
TERMINAL SETUP
.
Back Light".
, or Soft key (OK).
.
or Soft key (OK).
or , and press
, and
, and
or