NEC UNIVERGE SV9300 User Manual page 4

PREFACE
This manual describes operating procedures of UNIVERGE IP Phone DT830(DG)/DT830 Multiline
Terminal to be connected to UNIVERGE SV9300 communication server.
OUTLINE OF THIS MANUAL
This manual consists of;
INTRODUCTION
Please read through this chapter before use for your understanding and proper use of this product.
TERMINAL SETUP
This chapter describes the operations to be performed on the Menu Screen, such as speaker volume
control and LCD contrast adjustment.
FEATURE OPERATION
This chapter describes the operating procedures of service features such as make a call, answer an
incoming call, set call transfer or call hold.
DIAL BY NAME
This chapter describes how to use directory service.
APPENDIX
This chapter describes the supplemental information of this manual.
ABOUT THE MARKS USED IN THIS MANUAL
The following table shows the meaning of the marks used in this manual.
MARK
CAUTION: The works that a user cannot perform by himself, some dangers that may cause
damages to the terminal and other cautions are described.
TIP: Useful tips when using this terminal are described.
TERMS IN THIS MANUAL
The following table shows the terms described in this manual.
TERMS
Dial Tone You will hear the dial tone from handset when you hang up the hand set. If you press
speaker key, you will hear the dial tone from speaker.
DESCRIPTION
DESCRIPTION
iii
PREFACE