NEC UNIVERGE SV9300 User Manual page 135

The terminal is not possible to make a call to mobile phone network through the smart
device.
TO AMSWER A CALL TO THE SMART DEVICE BY USING
TERMINAL HANDSET
1.
An incoming call is terminated to the smart device.
2.
Confirm both Connect key and Path key are lighting green.
3.
Lift the handset to answer the call.
4.
Start conversation with calling party.
TO MUTE A MIC
During conversation with hands free (using microphone and speaker of the terminal), it is possible to
mute the microphone with the following steps.
1.
Press Soft key (MUTE).
The microphone is muted.
The calling party's voice can be heard from the speaker.
2.
Press Soft key (MUTE) once again.
The microphone becomes available.
PLAY MUSIC BY USING TERMINAL SPEAKER
When the terminal and smart device is connected through Bluetooth, it is possible to play music which
is stored in smart device by using terminal speaker.
PLAY MUSIC
1.
Play music of smart device.
Refer to the users' manual of smart device for how to play music.
When the terminal handset is onhook, Speaker lamp lights red. →
2.
The music is heard from terminal speaker automatically.
3.
Adjust the volume level by using
If you lift the handset during music playing by using terminal speaker, the music will be heard
from handset receiver. And after you replace the handset, the music play is stopped.
STOP THE MUSIC PLAY FROM SPEAKER
1.
Press Speaker key.
Speaker key lamp goes off. →
2.
The music play from speaker is stopped.
If you press the Speaker key once again, the music is played from the terminal speaker.
APPENDIX D PAIRING WITH SMART DEVICE
key.
127