NEC UNIVERGE SV9300 User Manual page 13

INTRODUCTION
The back light lighting time can be changed by means of system data setting. For details,
please contact the system administrator.
The maximum number of directory entries registered per terminal is set by means of system
data setting. For details, please contact the system administrator.
When 1000BASE-T is used, it is not available to select "Fixed". LAN interface configuration
is set at installation. For details, please contact the system administrator.
The line up of above adapters and accessories may vary depending on country or market.
For details, please contact the NEC's dealer or NEC.
When a PoE (Power over Ethernet) HUB supports NEC Proprietary Protocol is used for
central power supply, ILPA-R UNIT, which is an adapter for converting IEEE802.3af to NEC
Proprietary Protocol is needed. When ILPA-R UNIT is used, 1000BASE-T is not available.
For details, please contact the system administrator.
For details of terminal firmware version, please contact the system administrator.
EHS Cable (APD-80), EAP-TLS and VPN (L2TP/IPsec (IPv4)) are supported for terminal
firmware 5.0.0.0 or later.
For details of terminal firmware version, please contact the system administrator.
The authentication protocol on Web Programming is supported TLS 1.2 only for terminal
firmware 5.2.0.0. or later.
For detail of terminal firmware version, please contact the system administrator.
VPN (L2TP/IPsec (IPv4)) is not supported for the ITZ-12D-3P TEL for China/ITZ-24D-3P TEL
for China/ITZ-8LDG-3P TEL for China/ITZ-12DG-3P TEL for China.
EHS Cable (APD-80) is not supported in ITZ-12DG .
The VLAN function by DHCP and File Download by HTTPS are supported for terminal
firmware 5.1.0.0 or later. For details of terminal firmware version,please contact the system
administrator.
5