❸ Installing A Ph Link Or Dual Link Module; I Installing The Module - Zodiac eXO iQ Series Instructions For Installation And Use Manual

❸ Installing a pH Link or Dual Link module

3.1 I Installing the module

• Turn the appliance off . Before beginning, disconnect all potenti al power supplies to the
appliance.
• Close the isolati ng valves in the pipework.
• Remove the cover (if necessary) according to step
• Unscrew (x2) and remove the bott om module, see fi gure
Connect the 2 cables "SENS" and "PUMP" of the pH Link or Dual Link module to the chlorinator's terminals,
•
see fi gure .
Positi on the module on the chlorinator according to step
•
fi gure .
• Repositi on the cover or depending on the model, see fi gure
or depending on the model, see fi gure
.
.
and screw (x2) according to step
.
EN
.
, see
19