Table of Contents
Advertisement
2.5 I Electrical connecti ons
Many devices can be connected to the control box in order to control the pool equipment (fi lter pump, lighti ng, auxiliary
systems, etc.).
The appliance must be permanently plugged in to the power supply (power supply protected by a 30 mA residual current
circuit breaker).
• Turn the appliance off . Before beginning, disconnect all potenti al power supplies to the
appliance.
2.5.1 Accessing the electrical terminal blocks
• Make sure that the appliance is powered off .
• Remove the aestheti c housing from the control box (clipped in place), (see fi gure
or
depending on
the model).
• Remove the bott om protecti ve cover from the appliance by unscrewing the 2 side screws (see fi gure
).
12
Advertisement
Table of Contents
