I Installing The Control Box - Zodiac eXO iQ Series Instructions For Installation And Use Manual

2.4 I Installing the control box

• The control box must be installed in a dry venti lated technical room protected against frost, with no pool
maintenance products or similar products stored nearby.
• The control box must be installed at a distance of at least 3.5 m from the outside edge of the pool. Always
comply with the installati on codes and/or laws applicable at the place of installati on.
• It must not be installed more than 1.8 metres from the cell (maximum cable length).
• If the box is fi xed to a post, a waterti ght panel must be fi xed behind the control box (350x400 mm minimum):
Att ach the metal mounti ng below to the wall or to the waterti ght panel using the screws and wall plugs
-
provided, (see fi gure
Fix the control box to the metal support by moving 1 (downwards) and 2 (rightwards) in order to lock the
-
box onto its support, (see fi gure
Using Wi-Fi Direct mode (depending on the model)
that the home Wi-Fi network can be detected when choosing the best locati on for the control
box. A Wi-Fi extender or powerline adapters with Wi-Fi hotspot (not supplied) may be required in
some cases.
31.5 cm
36.4 cm
).
).
9.6 cm
: Use a smartphone (Setti ngs/Wi-Fi menu) to check
EN
11