I Installing The Fl Ow Switch On The Pod Kit - Zodiac eXO iQ Series Instructions For Installation And Use Manual

3.3 I Installing the fl ow switch on the POD kit
• Take the fl ow switch provided with the appliance control box.
• Place it inside the housing provided for this purpose on the POD Kit and screw in place.
• Screw using the clamping nut only (screw by hand only!).
• The arrow showing the directi on of water fl ow on the top of the fl ow switch must be perfectly
parallel with the piping on which the POD kit is positi oned.
EN
: Flow switch
23