❺ Use; I User Interface; I Confi Gurati On Before Use - Zodiac eXO iQ Series Instructions For Installation And Use Manual

❺ Use

5.1 I User interface

• Before acti vati ng the chlorinati on functi on on the appliance, check that the salt added to the
pool has completely dissolved.
Blue indicator on steady:
Too low water conducti vity (low salt, water
too cold, worn cell, etc.)
Acti vate/Disable LOW mode:
Chlorine producti on reduced to between
0% and 30% in intervals of 10% (can be
confi gured in the relevant MENU).
The "LOW MODE ON" message is
displayed.
User menu:
Setti ng the parameters.
arrows:
- Browse a menu
- Increase or decrease a setti ng value
- Lock/unlock the user interface (Press
the 2 butt ons simultaneously for 4
seconds).
* The interface graphics may vary depending on the model

5.2 I Confi gurati on before use

5.2.1 Switching on
• Press to switch the appliance on.
• The appliance's informati on is displayed on start-up:
5.2.2 Setti ng the language
• On fi rst start-up, the list of available languages is displayed; simply select the desired language using the
butt ons. Confi rm the selecti on by pressing
• To change the language at a later point, press
• Confi rm the selecti on by pressing
*
Wi-Fi LED
(depending on
the model)
.
and browse using the
.
Blue indicator on steady or
fl ashing:
View informati on or acti on to be performed
on the screen.
Switch on -/Switch off (press and hold)/
Switch to standby(press and release)
Acti vate BOOST mode:
Chlorine producti on at 100% for a
cumulated 24 hours. The "BOOST ON"
message is displayed with the ti me
remaining.
butt on:
- Confi rm the highlighted selecti on
- Delete an error message requiring
human interventi on (press and hold for
4 seconds)
To acti vate Wi-Fi Direct mode
to connect to the iAquaLink™ app
(depending on the model)
(Press both butt ons unti l the Wi-Fi LED
starts to fl ash)
See "6.1 I Confi guring the appliance
before fi rst use".
butt ons.
EN
29