I Electric Connecti Ons - Zodiac GenSalt OT Series Instructions For Installation And Use Manual

2.5 I Electric connecti ons

Many devices can be connected to the control box in order to control the pool equipment (fi lter pump, lighti ng, auxiliary
systems, etc.).
The appliance must be permanently plugged in to the power supply (power supply protected by a 30 mA residual current
circuit breaker).
2.5.1 Accessing the electrical connecti on terminal boards
• Make sure that the appliance is powered off .
• Remove the (snap-on) cosmeti c cover over the control box, (illustrati on or depending on the model).
EN
• Remove the control box lower protecti on cover by unscrewing the two side screws (illustrati on ).
10