Table of Contents
Advertisement
4 Installation
4.4 Moving the instrument table with the devices
Action
CAUTION!
Action
50 / 136
1. Use a screwdriver to remove the grub screw from the hole in
which the foot switch is to be secured.
The adapter plate for the foot switch cannot be removed. The
upper plate on which the foot switch is mounted can be rotated
for ergonomic adjustment of the foot switch.
2. Place the adapter plate of the foot switch at the desired position
on the table foot so that the corrugated sides of the adapter plate
and table foot interlock and the holes in the adapter plate and
table foot are aligned.
3. Rotate the upper plate until the assembly hole is aligned with the
two holes.
4. Screw the adapter plate onto the table foot using the screws
supplied.
5. Screw the foot switch onto the adapter plate using the enclosed
two screws.
6. Rotate the foot switch into the desired working position.
4.4 Moving the instrument table with the devices
Mechanical hazard from moving parts
Injuries may be caused by the instrument table lowering.
When lowering the instrument table, always ensure that no
u
objects or body parts are within the movement range of the
tabletop.
Read the instructions for use of the instrument table and follow its
u
warning instructions.
1. Carefully lower the table to the lowest position.
2. Lift the table slightly by the narrow side of the tabletop on the slit
lamp side and move it on its casters. Use both hands to lift the
table.
Documentation set
VISULAS green
000000-2096-101-DokS-en-GB-150322
Advertisement
Table of Contents
