Routing Cables From The Bottom - Huawei UPS5000-E-125 kVA User Manual

UPS5000-E-125 kVA
User Manual (Integrated UPS 3.0, 02291136)
Use corrugated pipes to protect cables when connecting cables. After cable
connection is complete, reinstall the removed insulation panels at the rear of the
cabinet.
----End

3.2.5.2 Routing Cables from the Bottom

Context
● Cables can be routed in and out from the bottom only when an enclosure
● The MCCB cabinet is used as an example. For details about cable connections
● Connect the internal cables first, and then the external cables.
Procedure
Step 1 Remove the cover plate from the cable hole at the bottom of the enclosure frame.
Step 2 Remove the insulation panels from the rear of the cabinet.
Step 3 Connect ground cables to the UPS cabinet.
Issue 01 (2022-09-26)
NO TICE
NO TICE
frame is installed on the cabinet.
for other cabinets, refer to the cable connections for the MCCB cabinet.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
76