Connecting A Remote Epo Switch - Huawei UPS5000-E-125 kVA User Manual

UPS5000-E-125 kVA
User Manual (Integrated UPS 3.0, 02291136)
Prerequisites
Figure 3-34 Communications cable route

3.2.6.1 Connecting a Remote EPO Switch

● Prepare the EPO switch and cable before installation. Prepare them before
● To prevent problems, equip the EPO switch with a protective cover, and enclose
Connect the EPO switch to the dry contact card on the UPS.
Issue 01 (2022-09-26)
NO TE
● The figure uses top cable routing as an example.
● The number and colors of communications cables are for reference only.
NO TICE
installation. The 22 AWG cable is recommended. AWG is short for American
wire gauge.
the cable with a protective tube.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
81