Table of Contents
Advertisement
9. Mount the fan module
The fan module is placed above the bass. It contains two
identical fans.
Fan module
2x
Fan
(Box: Fans)
1x
Fan duct top
(Box: Center kit)
1x
Fan duct bottom
(Box: Center kit)
4x
(M4x8, Torx T20)
(Box: Center kit)
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
9.1. Assemble the fan module
1. Rotate the fans so that the
F2
cable is facing backward and the
Then slide the fans onto the bottom part of the fan duct.
F2
2. Place the top part of the fan duct on top, and fasten it with 4 screws
Make sure the cables (F1, F2) comes through the slot at front without being pinched.
4x
F2
F1
33
F1
cable is facing left (see illustrations).
F1
.
(M4x8, Torx T20)
F2
F1
Copyright © 2024 Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
