Cisco Room Kit EQX Installation Manual page 51

4. The top panels are fastened to the grille with 15 screws
and washers
(M4x10, Torx T20) (Plastic washer)
×15
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
a. First, place the left and right panel onto the pegs as
in total. shown in the illustration. Then, place the center panel
on top.
b. Place the washers on the pegs.
c. Screw through the washers and into the pegs.
15x
51
15x
Copyright © 2024 Cisco Systems, Inc. All rights reserved.