Cisco Room Kit EQX Installation Manual page 55

3. The left and right stiffener are fastened to the grille with
13 screws and washers
(M4x10, Torx T20)
in total.
×13
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
a. Place the stiffeners onto the pegs as shown in the
illustration.
(Plastic washer)
b. Place the washers on the pegs.
c. Screw through the washers and into the pegs.
13x
55
13x
Take care to place the
stiffeners correctly.
This flap points away
from the grille.
Copyright © 2024 Cisco Systems, Inc. All rights reserved.