Table of Contents
Advertisement
22.2. Connect the interface arms with the adjustable brace
1. Measure the horizontal distance between the interface holes on your screen.
2. Extend the brace and fix it at the desired length by tightening the two screws.
The adjustable brace supports distances ranging from 400 mm to 600 mm.
Distance between
interface holes.
Notches show the fixing position for 400 mm, 500 mm, and 600 mm distances.
600
Example: If the interface holes are
600 mm apart, extend the brace to
the notch marked with 600.
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
60
Copyright © 2024 Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
