Mychef COMPACT MASTER Product Manual page 42

It is important that you connect to a Wi-Fi network with the 2.4GHz
frequency band, as 5GHz networks do not support smart control
functionality.
Once the Wi-Fi network is configured, it is important to wait a few minutes
until the Wi-Fi network disappears (Mychef + MAC address). If this does not
happen, it means that the configuration data entered to authenticate on the
Wi-Fi network is not correct. , then the process must be started again.
7.1.3. Linking the oven with the device (mobile phone, tablet or computer)
When an internet connection has been established
visible. The next step will be to link our oven with the remote control. To do this you must
visit the following web
with the user created in the section7.1.1and linked to the oven in the section7.1.2.
If this is the first time you have paired a device, the button combination that can be seen
on the screen will appear on the screen.Figure35.
To add a new device, select the "Add new device" button and fill out the
form.Figure36with a name for the device (which will help us identify it) and the MAC
address of the oven that we have previously copied.
7
Finally, we select the "Add device" button that appears at the end of the form to add the
oven remote control to our device (mobile phone, tablet or computer).
See section7.1.2.to configure the internet connection.
6
The MAC address consists of six blocks of two characters that can be a number from 0 to 9 or a
7
letter from A to F. If the MAC address of the equipment has not been noted, it can be displayed on
the oven control panel. See section7.3.2.
mychefpro.com
address:https://mychef-432df.firebaseapp.com/or QR
COMPACT MASTER PRODUCT MANUAL - DT.MP.CM.2202.1
, the Wi-Fi network will no longer be
6
code,log in
42