Mychef COMPACT MASTER Product Manual page 23

6.1.1. Power on the equipment
The equipment is turned on or off by pressing the START/STOP button for two seconds.
In order to protect the oven from possible overtemperatures, it is possible
that some protection elements work even when the oven is turned off. When
the oven is at a safe temperature they will turn off automatically.
If the equipment does not turn on, check the status of the safety thermostat, located on
the back of the equipment.
mychefpro.com
The phase number is displayed to the right of Ph after
pressing the PHASE button. To change phase, press the
+/- selectors
During the phased cooking process, the progress is
shown on the display, the current phase in relation to the
final phase.
In the event that an error appears, the first two digits of
the display show ER, followed by the error number. Refer
to the errors chapter for more information on this.
There is the possibility of modifying the oven's operating
parameters. In the parameter editing menu, the central
display shows a P, followed by the parameter number.
The two digits on the right show the parameter value.
Refer to the setup menu chapter for more information on
this.
The program is shown with a P in the first digit, followed
by the program number.
Board7. Description central display messages
COMPACT MASTER PRODUCT MANUAL - DT.MP.CM.2202.1
23