1. Manuals
  2. Brands
  3. Mychef Manuals
  4. Commercial Food Equipment
  5. iCOOK MAX 20 GN 1/1
  6. Product manual

Mychef iCOOK MAX 20 GN 1/1 Product Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
iCOOK MAX
Product Manual
Installation, use, and maintenance
1
mychefpro.com
PRODUCT MANUAL
iCOOK MAX
-
DT.MP.ICMG.2405.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iCOOK MAX 20 GN 1/1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mychef iCOOK MAX 20 GN 1/1

Summary of Contents for Mychef iCOOK MAX 20 GN 1/1

  • Page 1 iCOOK MAX Product Manual Installation, use, and maintenance mychefpro.com PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2...

  • Page 2: Table Of Contents

    1.2.6. Explosion Hazard ..................... 9 1.2.7. Poisoning Hazards ....................10 2. INTRODUCTION ....................11 3. TECHNICAL CHARACTERISTICS................12 3.1. Main features Mychef iCOOK MAX ................12 4. INSTALLATION ..................... 13 4.1. Receipt, transportation, and location ................13 4.1.1. Reception ....................... 13 4.1.2.
  • Page 3 5.1.2. Fist use ........................29 Electric ovens ..................32 Gas ovens ....................33 5.1.3. Main menu ......................37 5.1.4. Mychef iCOOK MAX main functions ..............38 5.1.5. Navigation ......................40 5.2. Chef ........................... 40 5.2.1. Cooking options ....................42 5.2.2. Chef Menu operation .................... 44 Temperature and time-controlled cooking ........
  • Page 4 5.8.4. Lighting ........................85 5.8.5. Smart Assistant ...................... 86 5.8.6. Maintenance ......................87 5.8.7. Probe ........................89 5.8.8. System analysis ...................... 90 5.9. System ..........................91 5.9.1. Restore factory defaults values ................91 5.9.2. Accounts ......................... 92 5.9.3. USB .......................... 93 5.9.4.

  • Page 5: Safety Regulations

    • If Mychef appliances are to be installed on the floor or on worktops not supplied by Mychef, follow the instructions in this manual. If using Mychef's own support structures, follow the assembly instructions on the packaging.
  • Page 6 The use of flames to detect leakage points is strictly forbidden. • Once the oven has been installed, the first time it is switched on, a qualified Mychef technician must carry out an analysis of the combustion gases (CO and CO ) and record them on the appliance when requested to do so.

  • Page 7: Use

    For this reason, we urge you to read this section thoroughly. Failure to perform any of the following safety precautions correctly may result in death, serious injury or property damage and will void the product warranty and hold Mychef harmless from any liability. Please keep this manual and retain it for future reference.

  • Page 8: Danger Of Corrosion

    Mychef only recommends the use of CleanDuo or DA21 detergent tablets as methods to be used during the self-cleaning process. The use of any other detergent tablets or detergent other than those specified above will exempt Mychef from any damage caused and will void the product warranty.

  • Page 9: Electric Shock Hazard

    Never open the back of the oven. The back of the oven is reserved for qualified personnel authorized by Mychef. Failure to comply with this rule invalidates the warranty and exposes the user to the risk of damage and injury which may be fatal.

  • Page 10: Poisoning Hazards

    The establishment used for ovens must properly ventilated to ensure correct combustion of it and to avoid the accumulation of gaseous substances that are dangerous to health. The ovens must not be exposed so far to air flows. Make sure that the supply gas is compatible with the parameters indicated on the data plate on the side of the oven.

  • Page 11: Introduction

    But first of all, we would like to thank you for choosing a Mychef oven from the iCOOK line. The iCOOK and iBAKE lines are the reflection of years of research and development to offer users the best possible experience, whether for the gastronomic sector or the bakery/pastry sector.

  • Page 12: Technical Characteristics

    Table 1. Main characteristics of Mychef iCOOK MAX ovens The maximum recommended food load per GN 1/1 tray of 65mm is 5 kg and 9.5 kg for GN 2/1 tray. The A-weighted emitted sound pressure level of Mychef ovens is less than 70dB (A). PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2...

  • Page 13: Installation

    4. INSTALLATION 4.1. Receipt, transportation, and location Before installation, the dimensions of the site where the equipment is to be located and the electrical and water connections must be checked and verified to be within the parameters detailed in the installation sheet, please see chapter 3. 4.1.1.
  • Page 14 Figure 1. Lifting the oven with a forklift truck If you do not have a forklift, the pallet has metal skids to slide the oven. First, the plates that secure the movement of the legs must be removed. This operation must be carried out with great care, as the weight of the oven is heavy and can be damaged during the process.

  • Page 15: Location

    The floor on which the oven is installed must be able to withstand the weight of the appliance at full load, for more information see characteristic table in section 3. In addition to the characteristics mentioned above, if the Mychef oven is a gas oven, it must meet the following characteristics: Be prepared for the evacuation of combustion gases to the outside.

  • Page 16: Minimum Distances

    There must be a minimum distance between the oven parts so that it can ventilate and cool properly. These minimum distances are: o Mychef ovens must always be positioned with the back of the oven at a minimum distance of 50 mm from the wall or partition.

  • Page 17: Placement

    Placement Mychef iCOOK Max models need to the placed on its own feet on a leveled floor. When the placement is done check that the oven is not exposed to hot air or vapours in the areas where the cooling fans are located (front right area and rear left area).

  • Page 18: Electrical Connection

    Bad grounding in gas ovens may lead with sensing problems during the gas ignition. Mychef ovens leave the factory with the power supply cable, internal or dimensional (section) manipulation of the power supply cable is not permitted, except to extend it, as long as it is replaced by a cable with the same characteristics as the original one.

  • Page 19: Single-Phase Connection 230 V 1N ~ 50/60 Hz

    Never connect a phase to neutral or earth. Check that the voltages of the installation correspond to those of the equipment. The following chapter shows the electrical connection for Mychef gas ovens. The voltage of this kind ovens can be found on the oven identification sticker.

  • Page 20: Gas Connection

    Do not connect the appliances to networks containing carbon monoxide or other toxic components. Those elements not supplied by Mychef used for the installation must comply with the regulations in force in the country of installation. Gas connecting pipes shall be properly connected by means of their mechanical connections, either by means of threaded joints or quick connectors, resulting in tight and firm joints.
  • Page 21 Working pressure: 20 mbar. In case the oven is installed somewhere where the type of gas used is different from the G20, qualified personnel authorised by Mychef will need to follow a technical note (Gas change) to make some internal changes inside the oven and check the proper combustion of the oven.
  • Page 22 Finally, contact the gas supply company. During the first use, a qualified technician authorised by the Mychef manufacturer must analyse the combustion exhaust gases (CO and CO ), noting the readings obtained on the oven itself.

  • Page 23: Water Connection

    Conductivity less than 20uS/cm Use of decalcifier and Mychef filter mandatory. The use of water at a higher pressure than 1000 kPa may cause damage to the oven. This will invalidate the warranty and Mychef will not be held liable. PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2...
  • Page 24 The use of water with characteristics other than those indicated may cause serious problems in the oven components, such as corrosion in the baking chamber or the glass, premature failure of the solenoid valves, etc. Periodically check the quality of the water in the oven. In the case of a new installation, the water must be allowed to run until the connection is completely purified.

  • Page 25: Drainage

    The outlet from the drainpipe to the wall drain must have at least 25mm air space. Only applicable to Mychef iCOOK MAX and Mychef iBAKE MAX ovens, at the end of the installation, it is recommended to pour 5 l of water into the drain to fill the internal siphon.

  • Page 26: Flues And Vapour Extraction

    (B). Figure 10. Evacuation tubes For correct evacuation, and in accordance with current national and local oven installation regulations, the manufacturer Mychef specifies two methods for this purpose: Mychef units are classified as exhaust gas type A3. PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2...

  • Page 27: Exhaust Gas Connection Type A3

    4.5.1. Exhaust gas connection type A3 • Type A3, appliance of type A with a fan at the entrance of the combustion chamber/heat exchanger. • To install Type A3 gas units with total rated loads less than or equal to 14 kW, it is sufficient if the installation site meets one of the following criteria: The installation site has a capacity of more than 2m /kW.

  • Page 28: Oven Reset Procedure

    4.6. Oven reset procedure Reserved for authorised service technicians only. Depending on the model, the reset button is located on the rear or bottom of the oven. If it has tripped, press it. Figure 12. Reset safety thermostat (lower) PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 29: Use

    To do this, the installer must select the "Installer mode" option and follow the steps marked by the user interface. This short instruction is intended to explain the steps to follow to start the Mychef iCOOK MAX oven for the first time.
  • Page 30 1. Turn on the oven. Then select a language and press "Done". 2. Choose the Wi-Fi network and then enter the password to connect: a) The oven does not connect to the Wi-Fi network: Make sure that the router is working, and that the password is correct. b) If the Wi-Fi network is currently unavailable: You can use your mobile phone as an access point to connect (Internet Hotspot mode).
  • Page 31 3. Choose "User Mode" to create an account and register the oven. • Make sure to enter a valid email address to receive the access credentials. • All fields must be completed. 4. If you already have a user account: enter your email address and password. The oven will be synchronised.

  • Page 32: Electric Ovens

    5. Access the "Installer Mode" and complete the fields with the required data. Electric ovens 1. System analysis: The oven will begin a general check to make sure the installation was done correctly. Follow the onscreen prompts. 2. Once the system scan has completed successfully, the system will initialize, and the main menu will be displayed.

  • Page 33: Gas Ovens

    As all Mychef gas oven are suitably configured at the factory on G20 (natural gas), the G20 is going to be preselected in the screen, in the case the gas type choose is G20 the oven is going to perform the combustion check, otherwise on the screen it will appear the physical modifications that the installer must make.
  • Page 34 After the physical modifications in case of the third family gases or by just selecting the G20 the oven will require the combustion analysis, maximum and minimum power in that order. Once the installer ends the combustion check the oven will continue with the system analysis.
  • Page 35 3. Once the system scan has completed successfully, the system will initialize, and the main menu will be displayed. PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...
  • Page 36 4. Access to the Mychef Cloud App With the credentials received via email it is possible to access the Mychef Cloud application from where it will be possible to synchronise with the cloud and carry out more advanced management of the oven. From the application it is possible: o Edit your own recipes with ingredients, preparation steps, cooking, and plating steps, as well as add photos.

  • Page 37: Main Menu

    5.1.3. Main menu Each time you start the oven after the initial setup, you will be taken directly to the main menu shown in the image below. Figure 13. Main menu display This menu is structured in three main sections: Cooking (Chef, SmartCooking, CookingPlanner, Regenerate) Self-cleaning (Mycare) Recipes and Settings...

  • Page 38: Mychef Icook Max Main Functions

    CookingPlanner - Assistant for planned cooking Regenerate - Assistant for regeneration of cooked foods MyCare - Self-cleaning programs Recipes - Access to user and Mychef recipe books Settings - Access to oven settings 5.1.4. Mychef iCOOK MAX main functions Chef The Chef cooking mode allows cooking by manually adjusting the parameters: •...
  • Page 39 My Recipes: With this recipe book you can create your own recipes in a simple and intuitive way, from your Mychef oven or from the "Mychef Cloud" application for mobiles and tablets. You can cook and manage up to 400 different recipes.

  • Page 40: Navigation

    Settings All the settings of the Mychef oven can be made in this menu. Help The "i" icon in the header or drop-down menu, which gives access to on-screen help, is present on all screens.
  • Page 41 "My Recipes" recipe book for future use. It is also possible to add a description of the steps required for the cooking process, if desired. By using the "Mychef Cloud" application, it will be possible to add images of the procedure and suggestions for plating.

  • Page 42: Cooking Options

    Add cycles Delete cycles Cycle indicator 5.2.1. Cooking options During the course of a cooking operation, the following actions are possible: Sound settings Direct steam injection Setting Cooking Check parameters Direct steam injection allows the user to increase the humidity in the chamber at specific times during cooking.
  • Page 43 Additional functions: Convection Mixed Steam • • • 6 Fan speeds 6 Fan speeds 6 Fan speeds • • DryOut SmartClima In each cooking cycle it is possible to add a warning at a specific moment. In this way it is possible to have a more exhaustive control of the cooking process by taking the necessary actions to improve the result.

  • Page 44: Chef Menu Operation

    Pressing add notification prompts you to enter a text message and select the time at which the notification will be displayed. Once cooking has started and the specified time has elapsed, the notification will be displayed showing the message entered. 5.2.2.
  • Page 45 In the event of an error the appliance will stop and display the error code (see chapter 5.9.8). The oven will not operate if the door is open. Cooking modes: There are three cooking modes: convection, mixed and steam. To select a particular mode, click on the corresponding button.

  • Page 46: Temperature And Time-Controlled Cooking

    In order to prolong the life of your oven, it is possible for the oven to automatically reduce the maximum temperature of the cooking chamber. In all cooking modes it is possible to humidify the chamber at will, by means of direct steam injection of steam via the drop-down menu under options: Temperature and time-controlled cooking The temperature and time control mode is the simplest, we simply choose a temperature...
  • Page 47 Figure 17. Example. Cooking 90ºC in steam mode for 10 minutes Figure 18. Oven temperature PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 48: Automatic Temperature Adjustment

    Automatic temperature adjustment Whenever a firing is started by pressing START/STOP, the oven automatically calculates the ambient temperature in the chamber and decides whether to carry out a heating or cooling process depending on the value to be reached. Figure 19. Temperature setting display If necessary, the temperature setting process screen will be displayed before firing starts, showing the room temperature and the chamber temperature.

  • Page 49: Cooking By Temperature And Core Probe Control

    Figure 20. Notice to load trolley When the door is opened and the oven is loaded, cooking starts automatically. To avoid excessive overheating, this state is maintained for a maximum of ten minutes. Cooking by temperature and core probe control The Temperature cooking and core probe control mode ends cooking when the temperature at the core of the food is equal to the selected temperature.
  • Page 50 Figure 21. Temperature setting and core probe control If we are running a core probe-controlled cooking cycle, the time/probe display will show the actual probe temperature. By pressing the cooking menu button, the probe temperature can be checked using the "Cooking Check" option: If you wish to adjust any of the cooking parameters, press: PRODUCT MANUAL iCOOK MAX...

  • Page 51: Speed Selection

    Figure 22. Cooking parameters settings When the oven is in the process of cooking controlled by means of a core probe, the chamber temperature display shows the temperature to be reached in the chamber, and the core probe display shows the actual temperature of the food.

  • Page 52: Editing Cycles

    In order to be able to correctly regulate the temperature in the chamber, in certain situations (low temperature, etc.) the oven can automatically select the reduced convection speed. Editing cycles Editing cycles can be done directly by navigating through the cycle indicator or phases can be added to the user programmes.

  • Page 53: Navigation Between Cycles

    Navigation between cycles To navigate between the different cycles, click on the arrows of the cycle indicator <1/2>. The first number in the cycle indicator indicates the current cycle and the second number indicates the total number of cycles. Adding a cycle To add a cycle to a cooking operation, press the (+) button.
  • Page 54 Figure 24. Cooking cycle overview screen This screen shows a summary of the programmed cooking cycles and allows you to view and navigate between them to see the parameters in detail. An acoustic signal is emitted each time a cycle is completed, or the next cycle is automatically passed on to the next one. If you wish to start cooking, selecting "Start now"...

  • Page 55: End Of Cooking

    End of cooking A cooking ends when time is up or the temperature at the heart of the food is reached. At the end of a cooking cycle, the appliance indicates this status visually and acoustically. In particular: An acoustic signal is emitted. The cooking finished message appears on the display.

  • Page 56: Smartcooking

    Save recipe: With this option, it will be possible to save the parameters in the recipe book by creating a recipe and reuse it in the future. It will not be necessary to make the parameter settings again. It is possible to save a recipe prior to cooking, or at the end of cooking. Repeat: Repeat the same cooking programme.
  • Page 57 Figure 26. Example of SmartCooking mode parameter selection PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 58: Go & Cook

    Some foods allow probe cooking, this option can be selected when compatible. Probe and sous vide cooking will be possible. Sous vide or low temperature cooking is particularly suitable for meat, poultry, fish and some vegetable preparations. This cooking allows the food to be cooked more gently, to lose less juice and to preserve its qualities.

  • Page 59: Save A Cooking Setting Or Recipe Creation

    It is assumed that you are already in the Chef screen and have either set the cooking parameters or have chosen to create a recipe from the "Mychef Cloud" application. After selecting the Save button, it will be necessary to fill in the following information to categorise the recipe: Category: Establishing a category will allow a better management of the recipes.
  • Page 60 After selecting the category, enter a name under which to save the recipe. To complete the editing of the recipe it will be necessary to access the "Mychef Cloud" application. It is possible to edit the recipe and choose the type of tray recommended for...
  • Page 61 Figure 28. Recipe screen It is possible to adjust the number of diners or trays in order to know the exact quantities of ingredients to be used in each case. By means of the parametric calculation, the new quantities required for the preparation of the recipe will be displayed in the ingredients section.
  • Page 62 Figure 29. Setting the number of diners or trays PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 63: Cookingplanner

    5.4. CookingPlanner The CookingPlanner cooking mode allows you to cook several trays of the same food or different foods or recipes that require different cooking times on different levels. For simultaneous cooking, only preparations with similar cooking profiles can be selected from Chef, SmartCooking or Recipe mode, which are the same in terms of temperature and humidity.
  • Page 64 The CookingPlanner mode has two different profiles to choose from: Multilevel: for cooking that starts at the same time, under a single cooking cycle and different end times depending on the recipe of each tray. The system will notify the user via the display and on the mobile device via a notification when to remove each of the trays at the end of cooking.

  • Page 65: Save Cookingplanner

    Figure 32. JustInTime option It shall be possible to interrupt any cooking process without interfering with the other loads. At the end of cooking, both in Multilevel and JustInTime, the display will show in green which of the trays must be removed in order to continue cooking. By opening the door, removing the tray and closing the door.
  • Page 66 Figure 33. Save recipe list after cooking is finished PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 67: Regenerate

    5.5. Regenerate The regenerate mode allows the regeneration of almost all types of previously cooked food, where it is finished and prepared for serving. For this purpose, the food can be already arranged on plates or in containers. It is possible to select manual regenerating in "Chef mode"...
  • Page 68 SmartCooking mode: This regeneration mode allows to regenerate food by categories, in an assisted way. It is only necessary to select the type of food and set the parameters shown on the following screen and press the START/STOP circular button. Figure 35.

  • Page 69: Mycare

    5.6. MyCare The use of the Mychef cleaning system allows automatic cleaning of the cooking chamber. This option includes several self-cleaning programmes available, as indicated below: Figure 36. MyCare self-cleaning programmes Rinse: Programme for rinsing the chamber with water. Eco Wash: This programme allows efficient washing with optimisation of resources.
  • Page 70 Programme Description Duration ECO self-cleaning programme 63 min Short Self-cleaning programme for low level of soiling 103 min Medium Self-cleaning programme for medium level of soiling 143 min Long Self-cleaning programme for high soiling level 183 min Rinse programme. 10 min Rinse Table 3.
  • Page 71 Figure 37. Start of washing programme Prior to the self-cleaning cycle, remove any solid food pieces/debris inside the chamber by hand. To remove food residues from the cooking chamber, remove them beforehand and prevent them from running down the drain. Do not place trays or grills during the washing process.
  • Page 72 Once the selected wash programme has been started, the display will show the oven user the progress and prompt the user to perform the necessary actions to complete the task correctly. Figure 38. Washing progress information At the end of a washing programme, the chamber can be dried. To do this, it is necessary to select the option "Dry the chamber at the end", at the beginning of the programme, before selecting the START/STOP circular button.
  • Page 73 carried out correctly. The oven will start a cooling process which can be carried out with the door open to make it faster. It will be directly notified by the following display: Figure 40. CoolDown process Once it has reached the correct temperature, insert the detergent into the dedicated compartment.
  • Page 74 Figure 41. Housing for MyCare detergent The iCOOK MAX models must use 4 tablets to ensure proper cleaning, due to the much larger chamber size. Before starting any cleaning process except rinsing, make sure that the detergent tablet has been inserted into the oven. To insert the detergent tablet into the chamber, it is essential to stop the fan.
  • Page 75 Figure 42. Message after pressing the START/STOP circular button If the cleaning process has been stopped without automatic termination, it is mandatory to remove all undissolved pieces of detergent tablet from the chamber before proceeding with the final rinse. If at the end of any of the automatic cleaning processes you detect detergent residues in the chamber (including behind the fan protection plate), run a rinsing programme or perform a manual thorough rinsing of the cooking chamber.

  • Page 76: Recipes

    5.7. Recipes The Mychef combi oven allows recipe management as follows: Recipes: recipe book created and managed by Mychef in which recipes are periodically uploaded via the cloud. My Recipes: in this recipe book you can create and modify your own recipes.

  • Page 77: Recipes

    When accessing this recipe book, you will be able to view all the recipes available in the Mychef cloud. This recipe book will be updated every time new recipes are made available in the cloud, as long as the oven has an Internet connection.

  • Page 78: My Recipes

    5.7.2. My recipes This recipe book offers the possibility to visualise the user's own recipes and manage them according to their needs. The recipes displayed here can be created in Chef, SmartCooking or CookingPlanner mode. When the recipe is created in SmartCooking or CookingPlanner mode, the corresponding icon will appear in the preview in the top left-hand corner.

  • Page 79: By Ingredients

    5.7.3. By ingredients By searching for one or more ingredients, the user interface will display the available recipes containing those ingredients, from all the available recipes in both Recipes and My Recipes. Figure 46. By Ingredients main screen The names of the recipes are given as examples. PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2...

  • Page 80: Recipe Management From Mychef Cloud

    5.7.4. Recipe management from Mychef Cloud The Mychef Cloud app allows recipe management from the "Recipes" mode. The operation is similar to that of the combi oven user interface, as described in the previous sections. The application allows the user to create recipes without having to be in the presence of the oven.

  • Page 81: Settings

    5.8. Settings This section describes the operations necessary for the correct configuration of the Mychef combi oven. Some of the functions have access rights and can only be accessed by entering a password. For more detailed information, please refer to the help available on the screen.

  • Page 82: Date/Time

    5.8.1. Date/Time To set the date and time, press or select the buttons and adjust. To exit, press the back arrow and the settings will be saved. Figure 48. Date/time settings PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 83: Language

    5.8.2. Language To change the language, navigate between the available languages, and select the desired language. To exit, press the back arrow and the setting will be saved. Figure 49. Language settings PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 84: Volume

    5.8.3. Volume The volume setting allows you to select between different sound options. Warning tone corresponds to the acoustic signals emitted by the oven when carrying out certain functions. For example, the end of cooking or an alarm. The volume setting also allows the sound to be muted.

  • Page 85: Lighting

    5.8.4. Lighting It is possible to adjust the duration of the chamber illumination from the options displayed on the screen. Select the desired option and press back and the setting will be saved. Figure 51. Lighting configuration PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 86: Smart Assistant

    - Safe Steam, if active, extracts the steam from the chamber in the last moments of cooking. In order to avoid burns or discomfort from steam when opening the door, Mychef ovens can extract steam from the chamber in the final moments of the cooking process. Even in convection mode, this extraction can be useful to remove any steam that may be released by the food in the cooking chamber.

  • Page 87: Maintenance

    5.8.6. Maintenance The Mychef combi oven has a preventive maintenance plan that will extend the life of the oven and allow it to operate in optimum conditions. Depending on the hours of use, the user interface will display the maintenance plan to be followed and the technical service contact details.
  • Page 88 The screen on the right shows the maintenance plans, clicking on the review buttons will display the necessary activities to be performed. The top bar shows the progress in operating hours associated with the revisions. Once the revision has been carried out, the date on which it was carried out will be indicated as shown in the image above.

  • Page 89: Probe

    5.8.7. Probe This section allows you to display the oven temperature readings at different points. Figure 54. Check probe temperatures By clicking on each probe, it is possible to edit the values. Register Name Parameter Editable Probe 1 Multipoint probe 1 Probe 2 Multipoint probe 2 Probe 3...

  • Page 90: System Analysis

    Each register is associated with a temperature reading point of the oven, allowing different critical points of the oven to be monitored. If the temperature of a sensor is higher than 350ºC or lower than -50ºC it means that the probe is not connected. 5.8.8.

  • Page 91: System

    5.9. System System displays the software version of the appliance and the option to upgrade or restore the system to factory defaults. Figure 55. System information The software can also be updated at this point. To do so, click on the Update button, and as long as there is an Internet connection, the system will be updated to the latest software version.

  • Page 92: Accounts

    5.9.2. Accounts This option allows you to consult the data corresponding to the user of the oven and the Technical Support Service. Figure 56. Consultation and configuration of accounts PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 93: Usb

    5.9.3. USB The appliance allows uploading and downloading of recipes and images as well as HACCP data. Figure 57. USB file upload/download The equipment allows the recording of temperatures and events occurring during normal use. To record data, insert a memory into the USB connector in the lower right corner of the oven.

  • Page 94: Consumption

    Figure 58. USB connector housing They can be viewed from any computer. The USB device system must always be FAT32. 5.9.4. Consumption In this section it is possible to consult the data corresponding to the energy consumption of the oven and the HACCP. In order to know the water and energy consumption, it is possible to define the desired range, whether annual, monthly, daily or hourly.
  • Page 95 Figure 59. Consumption data Similarly, by accessing the HACCP Data option and setting the desired range, it will be possible to display the graph corresponding to the HACCP data record. Figure 60. Consumption progress PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

  • Page 96: Measurement System

    5.9.5. Measurement system The oven configuration allows working both in the international measurement system and in the Anglo-Saxon system. By selecting one of the two options and pressing the back button, the configuration will be saved, and the system restored. Figure 61.

  • Page 97: Advanced Settings

    5.9.6. Advanced settings This section allows to consult the internal configuration parameters of the oven and facilitates the diagnosis of faults and malfunctions as well as its solution to the Technical Assistance Service. Name Parameter Editable Type Type of oven No(SAT) Working mode Working mode...

  • Page 98: Nightwatch

    NightWatch functionality. Pressing the circular button START/STOP in this state will cancel automatic recovery. If it is not canceled, the Mychef oven automatically checks the temperature of the cooking chamber. If the temperature is below 56°C there may be a risk of bacterial contamination.
  • Page 99 INVERTER ERROR Communication between relay board and motor inverter. Check the cable connecting the two components. Check if the inverter communication LED is flashing. BELL ERROR Communication between boards is not responding. Check wiring FERMENTER ERROR Communication between boards or sensors not responding. Check wiring STATIC OVEN ERROR Communication between boards or sensors not responding.
  • Page 100 • Defect in the ignition transformer, check if the ignition electrode has the correct gap between the rods, and is generating a spark. 30.05 GAS SAFETY ERROR – LOCKOUT • Fuel valve malfunction, check if the valve is DUE ABSENCE OF THE FLAME opening the gas properly by looking the gas SIGNAL DURING OPERATION counter.
  • Page 101 30.67 GAS ERROR – MIN TEST HIGH CO Introduced CO during min combustion test are too high adjust the gas valve accordingly and repeat the test. 30.68 GAS ERROR – MIN TEST LOW CO Introduced CO during min combustion test are too low adjust the gas valve accordingly and repeat the test.

  • Page 102: Maintenance

    Camera rain cover Weekly Ignition and detection electrodes (gas ovens) Yearly Table 8. Frequency of cleaning Mychef ovens Before starting any cleaning program, any trays, grids, grates, probes, or other accessories inside the chamber must be removed. PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2...

  • Page 103: Cooking Chamber

    Mychef disclaims any liability. 6.1.1. Cooking chamber Mychef iCOOK MAX ovens feature self-cleaning as standard (MyCare) for automatic and unattended cleaning of the cooking chamber. MyCare enables greater energy savings with lower detergent consumption and fewer toxic emissions. Therefore, Mychef only recommends the use of CleanDuo tablets for this process.

  • Page 104: Fan And Heat Exchanger Area

    To clean these more delicate surfaces (support of the control and the control itself) only a very soft cloth and a cleaning product for delicate surfaces should be used. Take special care with the control panel, Mychef will not be held responsible for any damage caused to this element if it is not cleaned properly.

  • Page 105: Door Gasket

    6.1.6. Door glasses Mychef iCOOK MAX ovens are equipped with a high thermal efficiency door with three glasses to reduce heat loss to a minimum. In order to clean these three glasses and the door itself, the outer door must be opened and the clips holding the two glasses open.
  • Page 106 Figure 64. Open glasses detail The inner part of the glass in contact with the cooking chamber will be cleaned during the self-cleaning process. The remaining glass, which is not in contact with food, should only be cleaned with a soft cloth and glass cleaning liquid. Once these glasses have been cleaned, close the inner door with the two glasses to the door and secure it with the clamps.

  • Page 107: Period Of Inactivity

    The equipment should be rendered useless by removing the power cord and any compartment and cavity closing devices. At the end of the useful life of Mychef ovens, it is necessary to adopt all the necessary management measures to reduce the negative impact on the environment and make a more efficient use of resources, adhering to the principles of prevention and preparation for reuse, recycling, and recovery.

  • Page 108: Preventive Maintenance

    These periodic inspections must be carried out by an authorised service technician. The following table shows the operations to be carried out on Mychef ovens in each of the revisions. The table is circular, and after 20,000h of use or 10 years of use, the time would start to count again from the left of the table.
  • Page 109 If the power cable is damaged, it must be replaced by your after-sales service or similarly qualified personnel in order to avoid hazards. In case of Mychef gas ovens the following warnings are mandatory. In accordance with the specified standards, gas components must undergo annual maintenance.

  • Page 110: Certifications

    7. CERTIFICATIONS EU declaration of conformity for electrical and gas appliances Manufacturer: MYCHEF TECHNOLOGIES SL Address: Carrer Tramuntana, 45- Pol. Ind. Torrefarrera 25123 Torrefarrera, Lleida, Spain Declares under its own responsibility, that the product: iCOOK gas ovens complies with the Machinery Directive 2006/42/EC which is in accordance with the following standards: •...

  • Page 111: Annex

    8. ANNEX 8.1. Country codes list designation All the country codes that appear on the labeling of the Mychef ovens or this manual are according to the ISO-3166-1:2014, please see below: PRODUCT MANUAL iCOOK MAX DT.MP.ICMG.2405.2 mychefpro.com...

This manual is also suitable for:

Icook max 20 gn 2/1

Table of Contents