Mychef COMPACT MASTER Product Manual page 28

For this cooking mode it is necessary to connect the single-point probe or
the sousvide probe.
If we try to start a program controlled by a single-point probe, and it is not
connected, the oven will warn acoustically and visually and the program
will not start.
6.1.3.3. Cooking phases
At the top of the control panel there are three buttons (Convection, Mixed, and Steam)
that each correspond to the cooking phases. Associated with each button is an indicator,
which shows the status of the phase.
Figure18. Cooking phase buttons and indicators
If the indicator for a specific phase is on, it means that that phase is being displayed or that
the phase is activated. If the indicator for a specific phase is off, it indicates that this phase
is disabled.
To configure a phase you must press PHASE. The message Ph will appear on the display
screen followed by the phase number.
To move between the different phases press the + / - button.
Within each phase the cooking parameters are configured.
During cooking, its progress appears on the screen, shown with Ph followed by the
activated phase in relation to the final phase.
mychefpro.com
Figure19. Phase indicator
COMPACT MASTER PRODUCT MANUAL - DT.MP.CM.2202.1
28