Using The Bluetooth Function - Panasonic FZ-G2 Series Operating Instructions Manual

Bluetooth
<Only for model with Bluetooth>
You can access internet and other Bluetooth devices without connecting cables.
NOTE
Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or body.
l
To use Bluetooth, set
l
menu of the Setup Utility.
The transmission rate will be lower when a microwave oven is used near by.
l
When you uninstall the Bluetooth Driver, turn Bluetooth off.
l

Using the Bluetooth Function

Before using a Bluetooth, turn the Bluetooth communication on.
Turning on/off the Bluetooth communication
1. To enable the wireless communication (
2. Click
(Start) -
3. To turn off the Bluetooth communication, set "Bluetooth" to [Off].
To turn on the Bluetooth communication, set "Bluetooth" to [On].
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For
example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference.)
Checking the Bluetooth communication status
1. Click (Start) -
NOTE
You can also clicking
l
check the communication status.
[Bluetooth] to [Enabled] (default) in the sub-menu of [Wireless Configuration] in the [Advanced]
Disabling/Enabling Wireless
(Settings) - [Network & Internet] - [Airplane mode]
(Settings) - [Devices] - [Bluetooth & other devices].
on the task tray, and then click
Communication).
*1
, and set "Airplane mode"
(Bluetooth Devices) - [Show Bluetooth Devices] to
*1
to [Off].