Panasonic FZ-G2 Series Operating Instructions Manual page 11

Flash Memory Backup/Restore Function
Panasonic Connect Co., Ltd. will bear no responsibility for any damage suffered (including loss of data) as a result of the use of this function.
Creating a Backup of the Flash Memory Data
You can create a backup of the flash memory data, which can be used to recover from hardware failure.
This function creates a backup of the recent state of the flash memory. To return the factory default, use a recovery disc. (
To create a backup of the flash memory to another storage media (e.g., external hard disk).
Connect the storage media, and follow the steps below.
1. Click
(Start) -
2. Click [Go to Backup and Restore (Windows 7)] under "Looking for an older backup?".
3. Click [Create a system image].
Follow the on-screen instructions.
NOTE
Connect the AC adaptor and do not remove it until backup is complete.
l
Restoring the Flash Memory Data
Connect the storage media that created the backup.
1. Click
(Start) -
2. Click [Restart now] under "Advanced startup"
3. Click [Troubleshoot] - [Advanced options].
4. Click [See more recovery options].
5. Click [System Image Recovery].
Follow the on-screen instructions.
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,
[Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.)
(Settings) - [Update & Security] - [Backup].
(Settings) - [Update & Security] - [Recovery].
*1
.
Create a Recovery Disc)