Panasonic FZ-G2 Series Operating Instructions Manual page 37

Tablet Buttons
Button
While OS is running
Run [Application1]
In the default settings, open
"Panasonic PC Settings Utility".
<Only when [Concealed Mode] is set
to [Enabled]>
Concealed Mode on/off. (
cealed Mode)
*2
Run [Application2]
In the default settings, backlit key-
board color is switched.
<Only for model with barcode
reader>
Read barcode
<Only for model without barcode
reader>
Run [Application3]
In the default settings, open
"Panasonic PC Camera Utility".
Volume down
Volume up
Windows key
Rotation Lock
*1 : You can change the button assign using Panasonic PC Settings Utility. (
*2 : During sleep/hibernation/power off (when operating by battery power): Checking the battery status. (
NOTE
The tablet buttons may not work immediately after Windows is started up or the Windows sign in screen (or the Welcome
l
screen) is displayed.
On the Windows sign in screen and Welcome screen, the tablet buttons are enabled and work in default irrespective of the
l
settings you made.
Under the following conditions,
l
When [A1 Button] in the sub-menu of [Tablet Button Configuration] in the [Main] menu of the Setup Utility is set to [Application1].
l
When [A2 Button] in the sub-menu of [Tablet Button Configuration] in the [Main] menu of the Setup Utility is set to [Application2].
l
When launch-
ing the Setup
Utility
*1
≪ F12≫ key
Con-
*1
≪ F2≫ key
≪ F10≫ key
*1
≪ ↓≫ key
≪ →≫ key
≪ Enter≫ key
≪ Esc≫ key
, and
Function
On the Setup Utility screen
<Only when [Concealed Mode] is set to [Disabled]>
You can change the button assign to [Disabled]/[Ctrl+Alt+Del]/
[Concealed Mode Trigger]/[Barcode Reader Trigger] (only for
model with barcode reader). (
You can change the button assign to [Disabled]/[Ctrl+Alt+Del]/
[Barcode Reader Trigger] (only for model with barcode reader). (
A2 Button)
<Only for model with barcode reader>
You can change the button assign to [Disabled]/[Application3]/
[Ctrl+Alt+Del]. ( A3
<Only for model without barcode reader>
You can change the button assign to [Disabled]/[Ctrl+Alt+Del]. (
A3 Button)
You can change the button assign to [Disabled]/[Brightness
Up/Down]. ( Up/Down
You can change the button assign to [Disabled]/[Brightness
Up/Down]. ( Up/Down
You can change the button assign to [Disabled]. (
Button)
You can change the button assign to [Disabled]/[Ctrl+Alt+Del]/
[Barcode Reader Trigger] (only for model with barcode reader). (
Rotation Lock Button)
Changing the functions assigned to the A1 / A2 / A3
buttons will reflect the function of "Action" in "A1", "A2" and "A3".
A1 Button)
Button)
Buttons)
Buttons)
keys)
Battery Indicator)
Windows