Panasonic FZ-G2 Series Operating Instructions Manual page 135

H. Roller
I. Expansion Bus Connector
This connects to the expansion bus connector on the bottom of the tablet.
Connecting/Disconnecting the Tablet
I M P ORTANT
Make sure to turn the tablet off for connection/disconnection.
l
Do not connect or disconnect the cradle while the tablet is powered on or in the sleep mode (i.e., when the power indic-
l
ator is blinking).
Connecting
1. Turn off the tablet.
Disconnect all the devices and cables and close the terminal cover.
If the keyboard base is attached, detach the tablet from the keyboard base.
2. Connect the AC adaptor to DC-IN jack of the cradle.
Connect the AC cord to the AC adaptor, and connect to an AC outlet.
Refer to the "OPERATING INSTRUCTIONS - Read Me First" accompanying computer for information on proper handling of the AC
l
adaptor and AC cord.