Panasonic FZ-G2 Series Operating Instructions Manual page 50

Sleep/Hibernation Functions
Starting Up Your Computer Quickly
The sleep or hibernation functions allow you to shut off the computer without closing programs and documents. You can quickly return to the programs
and documents that you were working on before sleep or hibernation.
The sleep mode of this computer supports the modern standby mode.
Function Recovery time
Sleep Short
Hibernation Rather long
Setting Sleep or Hibernation
Sleep
1. Click (Start) -
2. Select the setting for "When plugged in, PC goes to sleep after" or "On battery power, PC goes to sleep after" under "Sleep".
Hibernation
1. Click
(Start) -
2. Click [Additional power settings] under "Related settings".
3. Click [Change plan settings] of the power plan you want to change.
4. Click [Change advanced power settings].
5. Click [Sleep], and click [Hibernate after].
6. Click the item and select the setting.
7. Click [OK].
Precautions
Connect the AC adaptor if the computer will be in sleep for a long period of time. If you cannot use the AC adaptor, use
l
hibernation instead.
Using sleep or hibernation repeatedly may cause malfunction of the computer. To stabilize computer operation, restart Win-
l
dows regularly (about once a week) without using sleep or hibernation.
Save the necessary data.
l
Close files you have opened from removable disks and network drives.
l
Do not enter sleep or hibernation in the conditions below, otherwise the data or file may be corrupted, sleep or hibernation
l
may not work, or malfunction may occur in the computer or the peripheral devices.
When the extended desktop function is activated.
l
When the drive indicator
l
When playing/recording audio files or displaying motion video such as MPEG files.
l
When using communication software or network functions.
l
When using peripheral devices.
l
If the computer fails to work normally, restart the computer.
Required. (If power is not supplied, all data will be lost.)
Not required. (However power is slightly consumed to keep the hibernation.)
(Settings) - [System] - [Power & sleep].
(Settings) - [System] - [Power & sleep].
is on.
Power supply