Hardware Diagnostics - Panasonic FZ-G2 Series Operating Instructions Manual

Hardware Diagnostics

If it appears that the hardware installed in this computer is not operating properly, you can use the PC-Diagnostic Utility to determine whether or not there
is a problem.
If the utility discovers a problem in the hardware, contact Panasonic Technical Support.
Software cannot be checked using this utility.
Hardware that can be checked using the PC-Diagnostic Utility
CPU/System
l
RAM XXXXX MB
l
Storage XXX GB
l
*1
SOUND
l
USB
l
Keyboard (Only when the keyboard base is attached)
l
Touch Screen
l
Wireless LAN (Only for model with wireless LAN)
l
Video
l
Wired LAN
l
Serial Port (Only for model with serial port)
l
Wireless WAN (Only for model with wireless WAN)
l
Bluetooth (Only for model with Bluetooth)
l
GPS (Only for model with dedicated GPS)
l
Smart Card (Only for model with Smart Card slot)
l
Front Camera (Only for model with front camera)
l
Rear Camera (Only for model with rear camera)
l
*1 : When the PC-Diagnostic Utility is running a loud beep will sound. (The beep will not sound if mute is using in Windows or [Sound] is turned off in [Con-
cealed Mode Configuration].)
NOTE
Only for tablet is subject to the diagnostic check.
l
When the video diagnostic check is running, the display may be distorted. This is not malfunction.
l
Regarding the PC-Diagnostic Utility
Operations
Select icon
Click the icon
Complete the PC-Diagnostic Utility and then
restart the computer
Touchscreen/External
mouse operations
Place the cursor above the icon
Touch or click (right click cannot
be used)
Click (close)
Internal keyboard operations
Press ≪ Space≫ , and then press ≪ →≫ ≪ ←≫ ≪ ↑≫ ≪ ↓≫ (
(close) cannot be selected)
Press ≪ Space≫ above the icon
Press ≪ Ctrl≫ + ≪ Alt≫ + ≪ Del≫