Panasonic FZ-G2 Series Operating Instructions Manual page 154

Other startup problems.
Cannot turn off the computer.
Cannot enter sleep or hibernation.
Cannot enter sleep or hibernation auto-
matically.
Entering Password
Forgot the password.
Even after entering the password, pass-
word input screen is displayed again.
Start in the Setup Utility (
l
words) to the default values. Start the Setup Utility and make the settings again.
Remove all peripheral devices.
l
Check to see if there was a disk error.
l
1. Remove all peripheral devices including an external display.
2. Right-click
(Start) - [File Explorer].
3. Click [This PC].
4. Right-click [Windows (C:)], and click [Properties].
5. Click [Tools] - [Check].
A standard user needs to enter an administrator password.
l
6. Follow the on-screen instructions.
Remove all peripherals.
l
It may take 1 or 2 minutes to turn off the computer.
l
Remove USB devices temporarily. If the problem persists, restart the computer.
l
It may take 1 or 2 minutes to enter sleep or hibernation.
l
The computer does not enter sleep or hibernation immediately after resuming. Wait approx-
l
imately 1 minute.
Disconnect peripheral devices.
l
If you connect to a network using wireless LAN function, select the profile and connect to the
l
access point ( Disabling/Enabling Wireless
If you do not use wireless LAN function, turn off wireless LAN function (
l
Wireless Communication).
Make sure that you are not using any software that regularly accesses the flash memory.
l
Supervisor Password or User Password: Ask the system administrator.
l
Administrator password:
l
If you have a password reset disk, you can reset the administrator password. Set the
l
disk and enter any wrong password, then follow the on-screen instructions and set a
new password.
If you do not have a password reset disk, reinstall (
l
Windows, and then set a new password.
The computer may be in ten-key mode. If the Num Lock indicator
l
Lock≫ to disable the ten-key mode, and then input.
The computer may be in Caps Lock mode. If the Caps Lock indicator
l
Lock≫ to disable the Caps Lock mode, and then input.
Enter the password using the same keyboard that was used to set the administrator password
l
or user password, as the key layouts of the on-screen keyboard and some external keyboards
may differ.
Setup Utility) to return the Setup Utility settings (excluding the pass-
Communication).
Disabling/Enabling
Installing Software) and set up
lights, press ≪ Num
lights, press ≪ Caps