Checking The Remaining Battery Power - Panasonic FZ-G2 Series Operating Instructions Manual

Battery indicator (situ-
ation in use)
Blinking green and
orange alternately
Blinking orange slowly
Battery indicator (replacing status):
<Only for model with Built-in Bridge Battery>
Tablet
Battery indicator (replacing status)
Green
Blinking red slowly
Blinking red
Not lit
NOTE
Once the battery is fully charged, the computer performs recharging only when the battery level becomes less than approx-
l
imately 95 %, so overcharging is avoided.
When [LED] is set to [OFF] on the [Concealed Mode Configuration] menu, LED does not light.
l
Charging
When connecting the computer to a power outlet, the battery charging starts automatically.
The battery pack is not charged when you first purchase it. Be sure to charge it before using for the first time.
l

Checking the Remaining Battery Power

Checking the remaining battery power on the screen
1. Click
or
The remaining battery power is displayed.
The temperature is low and the computer is warming up to prevent the flash memory drive from malfunctioning. The
computer will start automatically after warming-up.
When you set [Battery Charging Indicator]
(B)
The battery pack can be replaced without turning off the computer.
The battery pack cannot be replaced.
The built-in bridge battery has deteriorated. Contact Panasonic Technical Support.
The battery pack can be replaced. (While the AC adaptor connected, shutdown,
l
hibernation)
The battery pack is not inserted or not being charged or other than those above.
l
Concealed mode
l
on the task tray.
Battery status
to [Flashing] on the [Main] menu of Setup Utility.
Battery status
is set to ON.