Panasonic FZ-G2 Series Operating Instructions Manual page 30

Touchpad
<Only for model with Keyboard Base>
Use the touchpad to move the cursor on the screen and perform computer operations.
Function
Move cursor
Click (Tap)
Double click (Double tap)
Vertical scroll
Disabling/Enabling the Touchpad
1. Press ≪ Fn≫ + ≪ Esc≫ (
NOTE
When the touchpad is disabled, it will remain disabled until you press ≪ Fn≫ + ≪ Esc≫ again, even if the com-
l
puter restarts.
Handling the touchpad
By design, the touchpad is to be used with a fingertip only. Do not place any object on the work surface or press down force-
l
fully with sharp-pointed objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pens).
Try to avoid having any harmful substances, such as oil, come in contact with the touchpad. The cursor may not work prop-
l
erly in such cases.
When the touchpad becomes dirty:
l
Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly
wrung. Do not use benzene or thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use
commercially available household cleaners and cosmetics, as they may contain components harmful to the surface.
Move the tip of your finger over the work surface.
Tap a touchpad or press a left button. Right-click: press a right button.
Tap a touchpad quickly two times or press a left button quickly two times.
Trace the right edge of the touchpad vertically with a finger.
Key Combinations).
A. Work Surface (touchpad)
B. Left Button
C. Right Button
Operation