DEBIX Infinity User Manual page 71

Verify UART3 communication:
1. Open Terminal on DEBIX Infinity and run the following command to install the cutecom
serial port tool:
sudo apt update
sudo apt install cutecom qtwayland5
Open cutecom tool and set the serial port parameters as shown in the following table:
2.
Table 16 Parameter setting of Cutecom
Parameter
Baudrate
Data Bits
Stop Bits
Parity
Flow Control
3. Set Device to /dev/ttymxc2 and click Open.
www.debix.io
Figure 69 UART3 short jumper
Value
115200
8
1
None
None
Figure 70 Device node setting
Polyhex Technology Company Limited
71 / 79