DEBIX Infinity User Manual page 67

3. Radar module and DEBIX Infinity board connection is completed.
4. Connect DEBIX Infinity with peripherals (keyboard, mouse, display) and insert the Micro
SD card with DEBIX system, and power on DEBIX Infinity;
5. Open the Terminal, run the command ldlidar_stl /dev/ttyUSB0;
6. Radar begins to work, the above command will output data continuously; when the radar
module is covered, some data will change to 0, as shown below:
www.debix.io
Polyhex Technology Company Limited
67 / 79