DEBIX Infinity User Manual page 37

Write the downloaded system image to the Micro SD card according to the steps 1-3
operation of "Boot from Micro SD
1. Insert the Micro SD card into DEBIX Infinity and set the onboard DIP switch to "011", the
system will boot from the Micro SD card, then power on.
2. After booting, the system will automatically write to eMMC through the Micro SD card, this
burn process will not be displayed on screen. When burning, the green LED on the
www.debix.io
Polyhex Technology Company Limited
Figure 31
Card". Then burn it to eMMC with the following steps:
Figure 32
37 / 79