Table of Contents
Advertisement
Hardware and software requirements
Hardware
Software
Xerox DocuSP IPDS User Guide
2 Installation and setup
The requirements and instructions for installing the DocuSP IPDS
software and setting up the printing environment are described in this
chapter. Review this entire chapter before proceeding with the
installation.
Some setup tasks are performed on the DocuSP window and some
are performed on the DocuSP IPDS window. The main installation
and setup tasks are:
•
Licensing and configuring the software and features
•
Defining the DocuSP IPDS queue
•
Setting up media
•
Loading IBM AFP resident outline fonts
•
Defining a logical printer
•
Verifying the installation
The following hardware and software is required to install DocuSP
IPDS.
The DocuSP IPDS software will run on a SunBlade 1000 or higher
based Digital Front End (DFE) printer controller that supports
DocuSP.
DocuSP, version 4.2 or higher.
If your DocuSP IPDS configuration requires a channel connection,
you will need an online channel board. Contact your local Xerox
representative for more information.
2-1
Advertisement
Table of Contents
