Blind-Spot Collision-Avoidance Assist (Bca) - Hyundai TUCSON Hybrid Owner's Manual

CAUTION
Take the following precautions to
maintain optimal performance of the
detecting sensor:
Never disassemble the rear corner
radar or radar assembly, or apply any
damage on it.
If the rear corner radar sensor or
any body panels near the sensor
have been damaged or impacted
in any way, Blind-Spot Collision
Avoidance Assist may not operate
properly, even though the warning
message does not appear on the
cluster display. We recommend
that the vehicle be inspected by an
authorized HYUNDAI dealer.
If the rear corner radars have been
replaced or repaired, we recommend
that the vehicle be inspected by an
authorized HYUNDAI dealer.
Use only genuine parts or the
equivalent specified for your vehicle
to repair the rear bumper where the
rear corner radar is located.
Do not apply license plate frame or
objects, such as a bumper sticker,
film or a bumper guard near the rear
corner radar.
The function may not work properly
if the bumper has been replaced, or
the surroundings of the rear corner
radar has been damaged or paint has
been applied.
If a trailer, carrier, etc. is installed,
it may adversely affect the
performance of the rear corner radar
or the system may not operate.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA)" section in this chapter.
Blind-Spot Collision-Avoidance
Assist
Blind-Spot Safety
With the engine on, select or deselect
from the Settings menu to set whether to
use each function.
- If 'Active Assist' is selected, the
function will warn the driver with a
warning message, an audible warning,
steering wheel vibration (if equipped)
and braking assist will be applied
depending on the collision risk levels.
- If 'Warning Only' is selected, the
function will warn the driver with a
warning message, an audible warning
and steering wheel vibration (if
equipped) depending on the collision
risk levels. Braking will not be assisted.
- If 'Off' is selected, the function will
turn off.
07
OTM070096N
7-39