Recommended Maintenance Schedule(S) - Toro Multi Pro 5800-D Operator's Manual

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
After the first 100 hours
After the first 200 hours
Before each use or daily
After each use
Every 50 hours
Every 100 hours
Every 200 hours
Maintenance Procedure
• Torque the wheel-lug nuts.
• Check the fan/alternator belt.
• Change the engine oil filter.
• Change the engine oil.
• Check the fuel lines and connections.
• Change the planetary-gear-drive lubricant.
• To provide proper performance and long sprayer life, follow these guidelines for
the first 100 operating hours:
• Pack the front wheel bearings.
• Inspect the seat belt(s) for wear, cuts, and other damage. Replace the seat belt(s) if
any component does not operate properly.
• Check the tire air pressure.
• Check the brakes.
• Check the tank straps.
• Clean the suction filter.
• Clean the pressure filter.
• Check the air cleaner.
• Check the engine oil.
• Check the coolant level.
• Check the hydraulic-fluid level.
• Clean the sprayer.
• Condition the spray system at the end of each daily use.
• Lubricate the pump.
• Lubricate all grease fittings.
• Grease the steering and suspension.
• Grease the steering and suspension.
• Check the battery-cable connections.
• Lubricate the boom hinges.
• Replace the air-filter element.
• Torque the wheel-lug nuts.
• Inspect the condition and wear of the tires.
• Check the fan/alternator belt.
• Change the engine oil filter. Change the filter more often when operating the
machine under heavy load or in high temperatures.
• Change the engine oil. Change the oil more often when operating the machine
under heavy load or in high temperatures.
• Check front wheel toe-in.
• Inspect all hoses and connections for damage and proper attachment.
• Clean the radiator fins.
• Clean the flow meter (more often when using wettable powders).
48