Toro Multi Pro 5800-D Operator's Manual page 86

6. Torque the flange-head bolts and flange locknuts
to 1978 to 2542 N∙cm (175 to 225 in-lb).
7. Tighten the 2 flange clamps by hand
125).
8. Assemble the quick-connect coupler of the
section hose onto the quick-connect fitting of the
section-valve manifold with the quick-connect
pin (Figure 124).
9. If you loosened the mounting hardware of the left
or right section-valve manifolds, tighten the nut
and bolt to 1978 to 2542 N∙cm (175 to 225 in-lb).
Installing the Agitation-Manifold
Valve
1. Align the flange of the agitation-valve manifold
and 3 gaskets with the flanges of the
agitation-bypass valve, pressure filter head, and
coupling adapter
Note:
If needed, loosen the mounting hardware
for the pressure-filter head as needed to provide
clearance.
Figure 126
1. Manifold (agitation valve)
2. Valve support
3. Flange locknut (1/4 inch)
(Figure
(Figure 126 and Figure
4. Flange-head bolt (1/4 x
3/4 inch)
5. Gasket
127).
1. Flange (pressure-filter
head)
2. Flange (coupling adapter)
3. Flange clamp
2. Loosely secure the agitation-valve manifold to
the agitation-bypass valve, pressure filter head,
and coupling adapter
flange clamps that you removed in
the Agitation-Manifold Valve (page
3. Assemble the agitation-valve manifold to the
valve support with the 2 flange-head bolts (1/4
x 3/4 inch) and 2 flange locknuts (1/4 inch) that
you removed in
Valve (page
4. Torque the flange-head bolts and flange locknuts
to 1978 to 2542 N∙cm (175 to 225 in-lb).
5. Tighten the 3 flange clamps by hand
g191302
127).
6. Assemble the quick-connect coupler of the
agitation hose onto the quick-connect fitting
of the agitation-valve manifold with the
quick-connect pin
7. If you loosened the mounting hardware for the
pressure-filter head, tighten the nut and bolt to
1978 to 2542 N∙cm (175 to 225 in-lb).
86
Figure 127
4. Quick-connect pin
5. Quick-connect coupler
(agitation hose)
6. Quick-connect fitting
(agitation valve manifold)
(Figure 127) with the 3
Removing the Agitation-Manifold
81).
(Figure 127).
g191301
Removing
81).
(Figure