Toro Multi Pro 5800-D Operator's Manual page 27

Mesh size—application rate
1. Higher application rate
2. Lower application rate
Selecting a Pressure Filter
Available screen sizes include:
Standard Equipment: 50 mesh suction filter (blue)
Use the pressure filter table to identify the screen
mesh for the spray nozzles you are using based
on chemicals products or solutions with a viscosity
equivalent to water.
Pressure Filter Table
Spray Nozzle Screen Mesh
Color Code (flow Size*
rate)
As required for low 100
viscosity chemicals
or solutions or low
application rates
80
Yellow (0.2 gpm)
Red (0.4 gpm) 50
Brown (0.5 gpm) 50
Gray (0.6 gpm) 50
White (0.8 gpm) 50
Blue (1.0 gpm) 50
Green (1.5 gpm) 50
30
As required for high
viscosity chemicals
or solutions or high
application rates
Figure 26
3. Screen mesh size
Filter Color Code
Green
Yellow
Blue
Blue
Blue
Blue
Blue
Blue
Red
Pressure Filter Table (cont'd.)
Spray Nozzle
Color Code (flow
rate)
As required for high
viscosity chemicals
or solutions or high
application rates
*The mesh size of the pressure filters in this table
are based on spray chemicals or solutions with the
Important:
g214214 When you spray with higher viscosity
(thicker) chemical products or solutions with
wettable powders, you may need to use a coarser
screen mesh for the optional pressure-filter; refer
to Figure 27.
Mesh size—chemical or solution viscosity
1. Higher-viscosity chemicals
or solutions
2. Lower-viscosity chemicals
or solutions
When you spray at a higher application rate, consider
using a coarser optional pressure-filter mesh; refer
to Figure 28.
27
Screen Mesh Filter Color Code
Size*
16 Brown
viscosity equivalent to water.
Figure 27
3. Screen mesh size
g214211