Making Copies With Mixed-Size Originals - Xerox XDL23 User Manual

Making copies
34

Making copies with mixed-size originals

The ADF and DADF allows you to copy a stack of originals which
contain different paper sizes (this stack of originals must be on
standard paper stock).
Note: In order to copy a stack of originals which contain different
paper sizes, you must activate the "Multisheet feeder mixed
sizes" special feature (program 32). Refer to the section entitled
Customizing your copier
Procedure:
1. Align the originals at edges A and B (as shown in the
illustration to the left).
2. Raise the original catch tray.
3. Place the stack of originals, face up, in the ADF/DADF;
ensure that the stack of originals is in the SEF direction.
4. Lower the original catch tray.
Note:
In order to have each copy on the same paper
size as each original, select 100% and select the
paper supply auto option.
In order to have all the copies on the same
paper size, select the reduce/enlarge auto
option and then select a specific paper tray (not
auto).
The bypass tray cannot be selected for this copy
operation.
5. Select the desired basic and/or added copy features.
(Refer to the sections entitled
copying features or
features.)
6. Enter the copy quantity.
Note: 99 maximum for 1 1 and 2 1 copying
30 maximum for 1 2 and 2 2 copying
7. Press the Start button,
in order to activate this copier setting.
How to use the basic
How to use the added copying
.
XDL23/XDL33/XDL33D User Guide