Table of Contents
Advertisement
APPENDIX M - WARRANTY REPAIR AND SERVICE
AMETEK Brookfield Viscometers are guaranteed for one year from the date of purchase against defects in materials
and workmanship. They are certified against primary viscosity standards traceable to the National Institute of
Standards and Technology (NIST). The Viscometer must be returned to AMETEK Brookfield or to the authorized
dealer from whom it was purchased for a warranty evaluation.
Transportation is at the purchaser's expense. The Viscometer should be shipped in its carrying case together with
all spindles originally provided with the instrument. If returning to AMETEK Brookfield, please contact us for a return
authorization number prior to shipping.
All AMETEK Brookfield DVPlus Viscometers are supplied from the factory with a Calibration Seal ( Located on the
back of the viscometer). The warranty stated above will be voided if the Calibration Seal has been damaged. Only
AMETEK Brookfield or our authorized servicing dealers may break the Calibration Seal for purposes of instrument
repair or recalibration.
For a copy of the Repair Return Form, go to the AMETEK Brookfield website:
For repair or service outside the United States, consult AMETEK Brookfield or the local authorized dealer
from whom you purchased the instrument.
M21-400 REV.1.1
www.brookfieldengineering.com
For repair or service in the United States, return to:
USA - Headquarters
AMETEK Brookfield
11 Commerce Blvd.
Middleboro, MA 02346 USA
Phone: 1-800-628-8139
Phone: 1-508-946-6200
Email (Sales): ma-mid.sales@ametek.com
Email (Service): ma-mid.ccs@ametek.com
www.brookfieldengineering.com
USA - Chandler, AZ
AMETEK Brookfield
3375 N. Delaware St.
Chandler, AZ 85225 USA
Phone: 1-800-528-7411
Phone: 1-602-470-1414
Fax: 1-602-281-1745
Email (Sales): SalesTeam.azic@ametek.com
Email (Service): CSS.azic@ametek.com
www.brookfieldengineering.com
D V P L U S D I G I TA L V I S C O M E T E R - O P E R AT I O N A L M A N U A L
77
Advertisement
Table of Contents
