Table of Contents
Advertisement
NOTE: USB Flash Drives must be formatted to FAT32 for DVPlus Firmware Updating
Insert a USB Flash Drive (FAT32 Format) with the Firmware Update into the USB A Port on the back of the DVPlus.
DO NOT Remove the USB Flash Drive at any point during the upgrade.
Temperature Probe
Turn the DVPlus On.
Level and AutoZero accordingly.
Go to Settings Menu and select Firmware Update.
M21-400 REV.1.1
Figure 2-9.14
Figure 2-9.15
D V P L U S D I G I TA L V I S C O M E T E R - O P E R AT I O N A L M A N U A L
USB B
USB A
Power in
On/Off Switch
Figure 2-9.15
27
Advertisement
Table of Contents
