Table of Contents
Advertisement
3.5.4 Setting up Bluetooth Automatic reconnection
DVPlus Connect App can be set up to reconnect with a DVPlus instrument if:
•
Instrument was out of the range after Bluetooth connection was established.
•
Instrument was restarted after Bluetooth connection was established.
To enable this feature, navigate to the Instrument Connection page and check the Attempt to Reconnect if
connection is lost option. (see Figure 10)
3.5.5 Connecting to the App via USB
•
Make sure the instrument is connected to a PC via USB-B cable (P/N DVP-202). Instrument USB Type B
connection to PC USB Type A connection.
•
Power up the DVPlus instrument, wait until it is fully loaded.
•
On the PC side, launch the DVPlus Connect app.
•
Navigate to the Instrument Connection page.
•
Select the USB option as instrument connection type (see Figure 11).
•
Use dropdown control to select available USB port. Click Refresh if no COM Ports are listed (see Figure
11).
•
Click Connect button.
3.5.6 Disconnecting from the App
To disconnect your DVPlus Instrument from the DVPlus Connect App whether connected via Bluetooth or USB,
simply navigate to the Instrument Connection page and click the Disconnect button.
M21-400 REV.1.1
D V P L U S D I G I TA L V I S C O M E T E R - O P E R AT I O N A L M A N U A L
Figure- 11
47
Advertisement
Table of Contents
