Table of Contents
Advertisement
to proceed.
TIP: Do not touch the Viscometer during the AutoZero process to ensure the best zero value.
TIP: The AutoZero sets the zero point of the viscometer range. A failure to properly level the Viscometer or to
remove the spindle may affect the zero value and all measurement results.
Figure 2-3.1
Figure 2-3.2
Figure 2-3.3
2.4 Navigation
The DVPlus Viscometer uses a 5-inch Color Graphical LCD Capacitive Touch Screen with RGB Interface display. All
user input is made through the touch screen.
After completing the AutoZero and pressing OK, the DVPlus switches to the Configure Viscosity Test screen.
(Figure 2-4)
Figure 2-4
M21-400 REV.1.1
D V P L U S D I G I TA L V I S C O M E T E R - O P E R AT I O N A L M A N U A L
17
Advertisement
Table of Contents
