Table of Contents
Advertisement
DISPLAY READING WILL NOT STABILIZE
•
Special characteristic of sample fluid. There is no problem with the Viscometer.
•
Refer to Appendix C.
•
Check for erratic spindle rotation.
•
Verify power supply.
•
Contact AMETEK Brookfield or your local authorized dealer for repair (see Appendix M).
•
Bent spindle or spindle coupling.
•
Contact AMETEK Brookfield or your local authorized dealer for repair (see Appendix M).
•
Temperature fluctuation in sample fluid.
•
Use temperature bath for control.
•
Air Bubble under spindle
•
Viscometer not Level
•
Fluid Turbulence
TECH SUPPORT
Information about the device and its functionalities can also be found on the product screen. Please access the
support information through the Main Menu, using the Technical Support button.
M21-400 REV.1.1
D V P L U S D I G I TA L V I S C O M E T E R - O P E R AT I O N A L M A N U A L
75
Advertisement
Table of Contents
